Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revisionBoth sides next revision | ||
project_lyta_materials_research [2007-07-17 14:00] – nik | project_lyta_materials_research [2007-08-01 11:34] – 192.168.1.33 | ||
---|---|---|---|
Line 190: | Line 190: | ||
[[http:// | [[http:// | ||
* (http:// | * (http:// | ||
+ | |||
+ | |||
Line 214: | Line 216: | ||
- | {{http:// | + | {{http:// |
- | [[http:// | + | |
- | * | + | * http:// |
- | * Activation requires about 1V/5A (5W | + | * Activation requires about 1V/5A (5W) |
* 2 cm throw | * 2 cm throw | ||
* Moderate actuation time should allow some rough positioning. | * Moderate actuation time should allow some rough positioning. | ||
- | | + | **Very** sturdy looking. |
- | | + | **Temperature** |
- | | + | |
- | * Conclusion: Tricky balance between power, heat, and actuation time. | + | |
- | | + | **Actuation time** |
+ | * Drawbacks: | ||
+ | * Conclusion: Tricky balance between power, heat, and actuation time. | ||
Line 236: | Line 238: | ||
- | {{http:// | + | {{http:// |
- | [[http:// | + | |
- | * Retail: | + | * Retail: |
- | http:// | + | |
* mondotronics also distribute in quantity. | * mondotronics also distribute in quantity. | ||
* The nanomuscle version embeds key parts of the electronics, | * The nanomuscle version embeds key parts of the electronics, | ||
Line 247: | Line 248: | ||
* Note: 5-pack costs $100 = $20 x 5. Presumably in volume we could do better. | * Note: 5-pack costs $100 = $20 x 5. Presumably in volume we could do better. | ||
- | [[http:// | + | |
* Manufacturer' | * Manufacturer' | ||
| | ||
Line 262: | Line 263: | ||
{{http:// | {{http:// | ||
- | [[http:// | ||
* available here | * available here | ||
| | ||
Line 271: | Line 271: | ||
- | [[http:// | ||
* L' | * L' | ||
Line 278: | Line 277: | ||
- | {{http:// | + | {{http:// |
* One concern with these devices: they cannot be left powered for too long, or they will overheat. | * One concern with these devices: they cannot be left powered for too long, or they will overheat. | ||
Line 287: | Line 286: | ||
===== Pneumatic ===== | ===== Pneumatic ===== | ||
- | [[http:// | ||
* A Shadow robot company project PNEUMATIC INSECT. | * A Shadow robot company project PNEUMATIC INSECT. | ||
http:// | http:// | ||
Line 293: | Line 291: | ||
- | **beautiful**[[http:// | + | **beautiful** |
* Shop by picture: | * Shop by picture: | ||
| | ||
- | [[http:// | + | |
* Fluidic muscles: | * Fluidic muscles: | ||
http:// | http:// | ||
Line 305: | Line 304: | ||
- | [[http:// | ||
* L' | * L' | ||
Line 312: | Line 310: | ||
- | {{http:// | + | {{http:// |
* Unlike some similar products, these might be cheap enough. | * Unlike some similar products, these might be cheap enough. | ||
Line 324: | Line 322: | ||
{{http:// | {{http:// | ||
- | [[http:// | + | |
* Also | * Also | ||
http:// | http:// | ||
Line 335: | Line 333: | ||
{{http:// | {{http:// | ||
- | [[http:// | + | |
* Robot store UK | * Robot store UK | ||
| | ||
Line 346: | Line 344: | ||
[[http:// | [[http:// | ||
* (http:// | * (http:// | ||
- | * Changes resistance as it stretches (100 Ohm/cm | + | * Changes resistance as it stretches (100 Ohm/cm) |
* The Merlin stretch sensor: | * The Merlin stretch sensor: | ||
Line 374: | Line 372: | ||
===== Piezo ===== | ===== Piezo ===== | ||
- | [[http:// | ||
* Piezo Motor/ | * Piezo Motor/ | ||
* Une Image: | * Une Image: | ||
Line 393: | Line 390: | ||
* Many other RC servo suppliers | * Many other RC servo suppliers | ||
- | [[http:// | ||
* RC servo basics: | * RC servo basics: | ||
http:// | http:// | ||
Line 404: | Line 400: | ||
===== Electric other ===== | ===== Electric other ===== | ||
- | [[http:// | ||
* A linear motor primer: | * A linear motor primer: | ||
| | ||
- | |||
- | [[http:// | ||
* Brushless linear actuators: | * Brushless linear actuators: | ||
http:// | http:// | ||
Line 421: | Line 414: | ||
- | {{http:// | + | {{http:// |
- | < | + | |
- | (. | + | |
- | </ | ||
* These seem to draw a great deal of power, however. | * These seem to draw a great deal of power, however. | ||
- | | + | * http:// |
- | | + | |
Line 438: | Line 427: | ||
- | {{http:// | + | {{http:// |
- | (. | + | |
- | + | ||
- | </ | + | |
| | ||
- | [[http:// | ||
* Coil Solenoids from Detroit Coil: | * Coil Solenoids from Detroit Coil: | ||
http:// | http:// | ||
Line 452: | Line 436: | ||
- | [[http:// | ||
* Vibro Tactile Actuators: Tacter, VIBROTACTILE TRANSDUCERS: | * Vibro Tactile Actuators: Tacter, VIBROTACTILE TRANSDUCERS: | ||
http:// | http:// | ||
Line 461: | Line 444: | ||
===== Polymer ===== | ===== Polymer ===== | ||
- | [[http:// | ||
* NASA's Worldwide electroactive polymer actuator webhub: | * NASA's Worldwide electroactive polymer actuator webhub: | ||
| | ||
Line 483: | Line 465: | ||
- | [[http:// | ||
* Page (in japanese) showing a prototype braille tactile display based on electroactive polymer actuators: | * Page (in japanese) showing a prototype braille tactile display based on electroactive polymer actuators: | ||
http:// | http:// | ||
Line 491: | Line 472: | ||
* Artificial muscles and miscle fibres made with ion-conductive polymers and EAPs: fromhttp:// | * Artificial muscles and miscle fibres made with ion-conductive polymers and EAPs: fromhttp:// | ||
- | |||
- | [[http:// | ||
* Prototype actuator arrays made from shape memory alloys and electrorheological sandwiches: | * Prototype actuator arrays made from shape memory alloys and electrorheological sandwiches: | ||
| | ||
Line 501: | Line 480: | ||
===== Push-Pull Cables ===== | ===== Push-Pull Cables ===== | ||
- | [[http:// | ||
* e.g. http:// | * e.g. http:// | ||
* Advantage: isolate electromechanical elements from panels | * Advantage: isolate electromechanical elements from panels | ||
Line 519: | Line 497: | ||
[[http:// | [[http:// | ||
* (http:// | * (http:// | ||
- | | + | |
+ | | ||
* Notes regarding the construction of a pressure-sensing matrix such as an electronic keyboard: | * Notes regarding the construction of a pressure-sensing matrix such as an electronic keyboard: | ||
- | |||
- | |||
- | [[http:// | ||
* Piezo: | * Piezo: | ||
and many other suppliers. | and many other suppliers. | ||
- | [[http:// | ||
* Linear-Displacement sensors: | * Linear-Displacement sensors: | ||
| | ||
Line 537: | Line 512: | ||
- | **arrays**[[http:// | + | **arrays** [[http:// |
- | * | + | * http:// |
- | [[http:// | + | * http:// |
- | * | + | |
Line 546: | Line 520: | ||
- | |||
- | [[http:// | ||
* See e.g. http:// | * See e.g. http:// | ||
Line 554: | Line 526: | ||
- | |||
- | [[http:// | ||
* Emfit - permanently charged electret film, converts mechanical stress into proportionate electrical energy (and vice versa): | * Emfit - permanently charged electret film, converts mechanical stress into proportionate electrical energy (and vice versa): | ||
| | ||
- | [[/ | + | |
+ | http:// | ||
* - measuring both magnitude and direction of force: | * - measuring both magnitude and direction of force: | ||
+ | |||
| | ||
- | [[http:// | ||
* electex - pressure, bend/ | * electex - pressure, bend/ | ||
| | ||
- | [[http:// | ||
* active piezoelectric composites for adaptive material systems (both sensing and actuation): | * active piezoelectric composites for adaptive material systems (both sensing and actuation): | ||
| | ||
Line 570: | Line 541: | ||
* tactile sensing | * tactile sensing | ||
- | [[http:// | ||
* tactile pressure sensors: | * tactile pressure sensors: | ||
http:// | http:// | ||
Line 583: | Line 553: | ||
====== Control ====== | ====== Control ====== | ||
- | [[http:// | ||
* DMX links: | * DMX links: | ||
| | ||
- | [[http:// | ||
* Basic stamp: | * Basic stamp: | ||
| | ||
- | [[http:// | ||
* Conrad' | * Conrad' | ||
http:// | http:// | ||
Line 600: | Line 567: | ||
==== shock absorption ==== | ==== shock absorption ==== | ||
- | [[http:// | + | |
* technogel (PU, non toxic): shock absorbant, shape memory, balanced pressure distribution, | * technogel (PU, non toxic): shock absorbant, shape memory, balanced pressure distribution, | ||
| | ||
Line 606: | Line 574: | ||
- | [[http:// | + | [[http:// |
+ | |||
+ | {{http:// | ||
+ | * fluid foam (floam and z-flo), gelastic, intelligel: | ||
| | ||
- | [[http:// | ||
* liquicell: combination of a low viscosity fluid and strategically placed seal points that control the flow of liquid: | * liquicell: combination of a low viscosity fluid and strategically placed seal points that control the flow of liquid: | ||
http:// | http:// | ||
- | |||
- | [[http:// | ||
* different visco-elastic gels: | * different visco-elastic gels: | ||
| | ||
Line 626: | Line 594: | ||
==== stretchable materials ==== | ==== stretchable materials ==== | ||
- | [[http:// | + | |
* darlexx: Darlexx® Stretch Barrier Laminates Darlexx® is an omni-directional spandex warp knit with a layer of a highly breathable elastic monolithic membrane. Windproof, waterproof, and breathable, Darlexx® provides solutions across a broad spectrum of end-product applications, | * darlexx: Darlexx® Stretch Barrier Laminates Darlexx® is an omni-directional spandex warp knit with a layer of a highly breathable elastic monolithic membrane. Windproof, waterproof, and breathable, Darlexx® provides solutions across a broad spectrum of end-product applications, | ||
http:// | http:// | ||
Line 632: | Line 600: | ||
- | [[http:// | ||
* CDXA Elastic laminate composite: A breathable, stretch, 3-layer laminate consisting of a nonwoven base, elongated strands of Lycra® XA® ( a man-made elastomeric fiber), and a nonwoven cover, bonded together with a hot melt adhesive. There are two types: MDXA in which the Lycra XA strands are laid down in the machine direction, which gives the resulting laminate good elasticity in the machine direction; and CDXA in which the elongated strands are laid down in the cross-machine direction, which gives the resulting laminate good stretch and recovery in the cross direction plus strength and stability in the machine direction. Both of these elastic laminate composites can be tailored to suit individual applications. | * CDXA Elastic laminate composite: A breathable, stretch, 3-layer laminate consisting of a nonwoven base, elongated strands of Lycra® XA® ( a man-made elastomeric fiber), and a nonwoven cover, bonded together with a hot melt adhesive. There are two types: MDXA in which the Lycra XA strands are laid down in the machine direction, which gives the resulting laminate good elasticity in the machine direction; and CDXA in which the elongated strands are laid down in the cross-machine direction, which gives the resulting laminate good stretch and recovery in the cross direction plus strength and stability in the machine direction. Both of these elastic laminate composites can be tailored to suit individual applications. | ||
http:// | http:// | ||
Line 641: | Line 608: | ||
[[http:// | [[http:// | ||
- | [[http:// | + | |
* protective elastic films: | * protective elastic films: | ||
| | ||
- | [[http:// | + | |
* polyurethane films and sheets: | * polyurethane films and sheets: | ||
| | ||
Line 653: | Line 620: | ||
==== chromic materials: ==== | ==== chromic materials: ==== | ||
- | [[http:// | ||
* pressure sensitive liquid crystals, elastic liquid crystal films: | * pressure sensitive liquid crystals, elastic liquid crystal films: | ||
http:// | http:// | ||
- | |||
- | [[http:// | ||
* chromic inks, prints and dyes: | * chromic inks, prints and dyes: | ||
http:// | http:// | ||
- | [[http:// | + | |
* thermocromic inks and paints: | * thermocromic inks and paints: | ||
http:// | http:// | ||
- | [[http:// | + | |
* thermochromic, | * thermochromic, | ||
| | ||
- | [[/ | + | |
* ink from Sherwood technology: | * ink from Sherwood technology: | ||
| | ||
- | [[http:// | + | |
* microencapsulation and liquid crystals from: | * microencapsulation and liquid crystals from: | ||
| | ||
- | [[http:// | + | |
* metamo colour: | * metamo colour: | ||
http:// | http:// | ||
- | [[http:// | + | |
* thermocolour sheet: | * thermocolour sheet: | ||
http:// | http:// | ||
- | [[http:// | + | |
* multicolour thermocromic pigment: | * multicolour thermocromic pigment: | ||
| | ||
Line 715: | Line 679: | ||
====== More potentially useful stuff ====== | ====== More potentially useful stuff ====== | ||
+ | |||
===== Electronic Supplies and Parts ===== | ===== Electronic Supplies and Parts ===== | ||
- | [[ElectronicSupplier]] | + | [[Electronic Supplier]] |
Line 788: | Line 753: | ||
- | ==== Humidity Displays ==== | ||
- | * how do we know if the person on the other side of the display is nervous, or has just entered the house after a massive rain-pour? | + | ==== Humidity Displays ==== |
- | | + | * how do we know if the person on the other side of the display is nervous, or has just entered the house after a massive rain-pour? |
- | | + | |
| | ||